March 19, 2024

Building your PC can be a complex but fun DIY activity, but if you want a system that is specific to your needs, you will have to build it yourself. The only problem that you might have is the computer’s portability after you have created it, but it is not very important than the advantages of having a self-built system. You can check out BritainReviews to review companies that deal with electronics if you decide to buy a computer.

To build your PC, you should follow these highlighted steps;

Shop for parts

You cannot begin to build without purchasing the needed parts, so the questions that you need to ask are;

  • What do you want the system to do?
  • How big do you want it?
  • Where would you build it?

Once you have answered these questions, you can now determine the parts you need for the type of system you have identified. If you are a gamer, you should check out the reviews of stores that sell gaming computer parts here.

The components of a computer you will need are;

  • Processor
  • Motherboard
  • Memory, video card, and storage
  • Power supplies and case

It is best to research all of these components to pinpoint the model with the features you need.

Assemble It

Once you have purchased your parts, you will begin the process of building/ assembling them. Follow the highlighted steps below to have it easy for you.

Get prepared

Place all your needed materials at arm’s reach and arrange them neatly. Try to avoid building on the floor because of the danger of static electricity.

Install the power supply

You will not need the power supply until much later, but it is best to install it first to prevent any difficulty installing it after the other components are in place.

Install the processor

You should install the processor on the motherboard before you put it in its case. You start by opening up the socket. If you are using an AMD CPU, you only have to lift the lever to release the locking mechanism. When you have opened the socket, try to align the CPU correctly and then secure the socket again by doing the same thing you used to open it up in reverse order.

Next comes the CPU cooler

The model of the cooler you got should have instructions on how to mount it. No matter the model, it is always best to mount the CPU cooler on the motherboard outside the case.

Install the RAM

The RAM bays are opened with small clips at either end, so you have to push them down. Make sure to orient it properly, as failure to do so will cause problems to the DIMM. When it is oriented correctly, the clips should rotate back up, and in the process, lock the memory in. You may consult your motherboard manual when things get muddled up.

Place the I/O plate

All motherboards come with their I/O plate that protects the computer from dust and any other intrusions that might get into it. Make sure to lock it securely on the motherboard.

Mount the motherboard

You should carefully install the motherboard, with all of the mounted components, in the case. Ensure that the risers are in their respective holes, and then you should screw it tight. Make sure not to overtighten the screws.

Install the Video card

The video card is meant to be placed into the longest slot on the motherboard. Push the card down into the slot until it clicks and it is secured well. The slot or slots have to be opened to accommodate the card or cards, depending on the number of cards you are using.

Once you have done all of these, you should mount the drives, connect the cables and wires, and start using the PC.